Is a Blocked Sewer Your Responsibility or the Water Authority’s?

Is a Blocked Sewer Your Responsibility or the Water Authority’s?

A blocked sewer is unpleasant enough without also having to work out who owns the section of pipe causing it. If the toilet is draining slowly, the shower starts gurgling and there is a bad smell coming from the drains, the blockage is probably further down the line than a single sink trap.

Finding a reliable plumber Hoppers Crossing that local residents can call is the sensible first step. The plumber can inspect the sewer line, locate the blockage and confirm whether it sits within the property’s drainage or Greater Western Water’s network.

The location of the blockage decides who is responsible for dealing with it. Pipes within the property are generally the homeowner’s responsibility, while Greater Western Water looks after faults within the public sewer network. The dividing point is not always obvious from inside the house, which is why the source needs to be properly located.

What the plumber will check

The plumber will usually begin by asking which fixtures are affected and when the problem started. One slow basin may have a local blockage, while several toilets, sinks and showers backing up together suggests the problem is further along the main sewer line.

They can then check the drains around the property and use a camera if they still cannot tell where the blockage is or what has caused it. Common causes include tree roots entering damaged joints, a build-up of grease, wipes being flushed down the toilet or an older pipe that has cracked or moved.

If the blockage is within the property, the plumber can clear the line and check whether the pipe needs any further repair. Clearing tree roots may get the water moving again, for example, but a cracked joint will probably allow them to return unless the damaged section is repaired.

READ ALSO  Garage Door Safety: The Complete Homeowner’s Guide to Protecting Your Family, Vehicle, and Property

When it becomes the water authority’s responsibility

If the plumber traces the blockage past the private drainage and into the public sewer network, it becomes a matter for Greater Western Water. The plumber can provide details of what they found so the authority knows where the suspected fault is and what has already been checked.

What to do while waiting

Use as little water as possible until the blockage has been checked. Avoid running the washing machine or dishwasher, and ask everyone in the house to keep toilet flushing to a minimum. Water entering a blocked line may come back through the lowest drain or overflow outside.

Do not pour drain cleaner into a toilet or sewer line. It is unlikely to fix tree roots or damaged pipework, and the plumber then has to deal with contaminated water when opening or clearing the drain.

If sewage has already overflowed, keep children and pets away from the area. Avoid walking through it or trying to hose it into another drain, as that simply spreads contaminated water around the property.

See also: Understanding Insurance for Life and Business

Keep the plumber’s report and invoice

When a plumber finds that the blockage is within Greater Western Water’s network, the homeowner may be able to claim back some of the reasonable call-out cost. Reimbursement depends on the authority confirming the fault and does not cover every type of work.

Keep the plumber’s invoice and ask for a short written explanation of where the blockage was found. Check Greater Western Water’s current reimbursement rules before making a claim, as costs for work carried out on private pipes will remain the homeowner’s responsibility.

READ ALSO  Why Proper Roof Shingle Installation Makes a Lasting Difference

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *