How High Should a TV Be Mounted on the Wall?

How High Should a TV Be Mounted on the Wall?

Most people realise a TV has been mounted too high about ten minutes into a film. The position looked fine while they were standing back from the wall, but from the sofa the screen is suddenly above their natural line of sight.

The mistake usually comes from measuring the wall before thinking about the person watching. There is no magic height from the floor that suits every home. A low sofa, a large screen and a television watched from bed will all produce different answers.

A good TV wall mounting Melbourne service will ask about the room before reaching for the drill. Where people sit matters far more than whether the screen looks perfectly centred on an empty wall.

Start with the sofa

Sit in the place where the television will be watched most often and look straight ahead. The centre of the screen should be reasonably close to that natural eye line. It can sit a little higher when the viewer leans back, but watching shouldn’t involve holding the head upwards all evening. Check the view from the other seats before settling on the position.

Screen size changes the result too. If a 75-inch television is mounted using the old bracket position from a 50-inch model, its centre may end up much higher than expected. The new screen needs to be measured as it is.

See also: Understanding Insurance for Life and Business

Try the position before committing

Painter’s tape is enough to create a temporary outline of the television on the wall. Mark its real width and height, sit down and see how the position looks from the sofa. Leave it there for a few hours so everyone has time to notice if it seems too high or too low.

READ ALSO  Pedicure Chair Measurements: Optimizing Comfort and Salon Layout

This is also the time to allow for anything sitting below the screen. A soundbar needs space, and a cabinet may limit how low the television can go. It is much better to discover that while moving tape around.

The bracket affects the final position as well. A fixed bracket keeps the television close to the wall, while a tilting bracket helps when the screen needs to sit higher. A full-motion bracket can turn towards another part of the room. Whichever style is chosen, it must suit the television and be secured to the right part of the wall.

Plan the whole setup, not only the screen

A wall-mounted television can be perfectly level and still look unfinished if cables are hanging underneath it. Decide where the power point will sit and where the HDMI cables need to emerge. The console or streaming device also needs a sensible home nearby.

Installing a new power point is electrical work and must be done by a licensed electrician in Victoria. If the room has unreliable Wi-Fi, a wired data connection may also be worth installing. These decisions need to be made before the television goes up, rather than worked out once it is already on the wall.

Testing the height may feel unnecessary when the new TV is waiting in its box. It is still much quicker than taking the screen down, filling the holes and mounting it again after the first uncomfortable movie night.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *